Hydraulic Applications
Pneumatic Applications
Instrumentation Applications
Industries Served

37

0

FLARE TUBE FITTINGS

SEALEXCEL® 37° Flare Tube Fittings are compact and simple in design for assembly and ensures maximum reliability, optimum performance and operational safety.

It is especially suited for low and medium wall tubing with good vibration resistance in a broad selection of types and sizes.

It is used in virtually every application that uses fluid power for motion control & automation.

SEALEXCEL® 37° Flare Tube Fittings consist of three precision Components such as Body, Sleeve and Nut, The design of these Components meets SAE J514 Standard.
PRODUCT RANGE AND OPERATING PARAMETERS
TYPES DESCRIPTION
Straight/Elbows/
Tees/Cross/Components
Male Connector, Male Connector SAE, Male Elbow, Male Branch Tee,  Male Run Tee, Female Connector, Female Elbow, Female Branch Tee, Female Run Tee,
Union Large Hex Union, Bulkhead Union, Union Elbow, Union Tee, Union Cross, Reducing Adaptor, Plug, Tube Cap, Tube End Nut, Tube End Sleeve,                     Bulkhead Fittings Lock Nut. ‘O' Ring.
Available Size 1/8" ODT to 1½" ODT
6mm ODT to 38mm ODT
Temperature Rating Up to 427ºC
End Connections Available with NPT (National Pipe Taper), BSP/ISO
(British Standard Pipe/ International Standard Organization),
SAE/MS Straight threads.
Our Broad Product range serves wide variety of applications.
SS 316 BAR STOCK ASTM  A-479
SS 316 FORGINGS ASTM  A-182
HEAT TRACEABILITY

SEALEXCEL® Stainless Steel 316 37° Flare Tube Fittings are Heat Code Traceable back to the original mill heat from which it was made.
Nom.Tube O.D
Inches
37O Flare
Straight thread
Nom.Pipe
Size
SAE St. Threads
Union and Bulkhead
Fittings with
Pipe Thread
1/8 5/16" x 24 1/8" 5000 PSI 5000 PSI
3/16 3/8" x 24 1/8" 5000 PSI 5000 PSI
1/4 7/16" x 20 1/8" 5000 PSI 5000 PSI
5/16 1/2" x 20 1/8" 5000 PSI 5000 PSI
3/8 9/16" x 18 1/4" 5000 PSI 5000 PSI
1/2 3/4" x 16 3/8" 4000 PSI 5000 PSI
5/8 7/8" x 14 1/2" 3000 PSI 5000 PSI
3/4 1-1/16" x 12 3/4" 3000 PSI 5000 PSI
7/8 1-3/16" x 12 3/4" 2500 PSI 5000 PSI
1 1-5/16" x 12 1" 2000 PSI 5000 PSI
PRESSURE RATING
SEALEXCEL 37 degree flare Tube Fittings provide zero leak, full flow connection in hydraulic system operating at working pressure as specified below.

Allowable working pressure ratings are based on min. design factor 4:1 for dynamic and 3:1 for static application.
NOTE :- Since many factors influence the pressure at which a system will or will not perform satisfactorily. 
             Details as shown in the above table are only guideline & not rigid
© Copyright, SEALEXCEL (INDIA) PVT. LTD., All Rights Reserved
Home About us History Certifications Industries Events Downloads Contacts Query Site Map